Preview site. Prices are estimates from a draft pricebook, and orders aren't open yet.
Build your sink

Stainless sinks, sized to your cabinet

Any width from 24″ to 48″ in eighth-inch steps, with the bowls, mount, drain, steel and ledge you choose. A joint venture with Prince Kitchen Sinks, an established stainless sink maker in India.

Build your sinkHow sizing works

Preview estimates from $1,450.00. Our bespoke line is still being set up, so this preview doesn't take orders.

A brushed stainless workstation sink with a tall faucet, a roll-up rack holding two pears, a dish basket with plates and bowls, and a glass rinser.
Prince Elite, an existing workstation sink by our partner Prince Kitchen Sinks. Its faucet, rinser and baskets are not builder options.

Set the width to the eighth of an inch

The builder accepts any width from 24″ to 48″ in ⅛″ steps, so you can start from the cabinet you have. Drag the ruler or type a width; this is the same model the builder uses.

Loading the 3D model…

Live preview model, not a photograph. 33″ × 22″ × 10″ with ledge and board

Sink width
33″
Cabinet, at least
36″

The cabinet figure is guidance: sink width plus 3″. It is not an approved fit, so confirm it with your installer.

24″ to 48″ in ⅛″ steps, like 33 or 33 3/8

What each choice changes

Six decisions after size. Each one changes the 3D model and the price in the builder, except the drain, which moves the plumbing and leaves the price alone.

Cutaway illustration of an undermount stainless sink with a workstation ledgeThe sink is cut through the middle of the bowl, looking toward the back wall. A stone counter sits above the rim, a wood board rests on the ledge just below the rim, and the drain passes through the floor into the cabinet below.
Illustration, not to scale: an undermount sink cut through the bowl. The builder draws your exact size.

Choose an option to highlight it in the cutaway drawing

Three places to start

Starting configurations to adjust, not stock models. Each price is worked out from the preview pricebook.

  • Plan drawing of Galley 30 30″19″FRONT

    Galley 30

    A compact single bowl for a 33″ cabinet, drain set to the rear to keep the base clear.

    30″ × 19″ × 9″Single bowl, undermount, rear drain

    $1,780.10 preview estimate

    Open in builder: Galley 30
  • Plan drawing of Workstation 36 LEDGEBOARD36″22″FRONT

    Workstation 36

    A full-width ledge with a wood board that slides over the bowl as prep space.

    36″ × 22″ × 10″Single bowl, undermount, rear drain, ledge with wood board

    $2,402.00 preview estimate

    Open in builder: Workstation 36
  • Plan drawing of Farmhouse 36 Double APRON FACE36″22″FRONT

    Farmhouse 36 Double

    Apron front with two equal bowls. Needs an apron-front base cabinet.

    36″ × 22″ × 10″Double bowl, apron front, centre drain

    $2,647.00 preview estimate

    Open in builder: Farmhouse 36 Double

From your measurements to a sink

Four stages, and where each one stands today.

  1. Specify

    Size and configure the sink in the builder. Save it, share it, print the sheet.

    Open now, as a preview

  2. Review

    We check your specification against your cabinet and countertop drawings.

    Not open yet

  3. Make

    Planned for the new bespoke line in India, run with our joint-venture partner, Prince Kitchen Sinks.

    Line being set up

  4. Ship and install

    Freight is quoted separately. Your installer and countertop fabricator fit the sink.

    Rates and times not published

A stainless sink with a dark basin, a pull-down faucet, a perforated colander holding broccoli and a wood board with tomatoes.
Prince Elite model 1, an existing sink by Prince Kitchen Sinks. Its dark basin, faucet and accessories are not options in our builder.princesink.in (opens in a new tab)

A joint venture with Prince Kitchen Sinks

Prince Kitchen Sinks is an established stainless sink manufacturer in India. Prince Elite, pictured, is one of their existing ranges. Made-to-measure sizes need a separate bespoke line, and that line is being set up now.

The land and permits for it are secured. Until it runs, this site is a preview: the builder and drawings work, prices come from a draft pricebook, and nothing can be ordered.

Joint venture
In place
Land and permits
Secured
Bespoke line
Being set up
Orders, final prices, approved spec sheets
Not yet
Two workers in hard hats and aprons at a green power press.A production hall with a steel coil line and workers in hard hats.

Manufacturing imagery published by Prince Kitchen Sinks; not the new bespoke line. princesink.in: establishment page (opens in a new tab)

For designers and kitchen studios

Specifying more than one sink? The builder keeps every design reusable.

  • Share links that reopen the exact specification
  • JSON export and import, so one design can become your house standard
  • Printable, dimensioned sheets for client meetings
  • Inches or millimetres throughout

Trade brief

Builds a file on your device and sends nothing. We haven't published a trade inbox yet, so keep the file for when we do.

Questions

Are the prices final?

No. They come from a demonstration pricebook (preview-2026-10-31) and are not offers or factory-approved prices. Freight, duty, tax and installation are excluded.

Can I order?

Not yet. The quote preview recalculates your price on our server and shows the result, but it takes no payment and places no order.

Will it fit my cabinet?

The builder shows guidance only: a base cabinet at least the sink width plus 3″. Confirm the fit with your installer and countertop fabricator; it is not an approved fit.

Do you provide CAD drawings?

Not yet. The printable spec sheet is a dimensioned drawing for discussion. It is not fabrication-ready CAD, and we don't offer CAD or PDF downloads. Your browser's Print / Save as PDF works on the sheet.

Delivery

Sinks will be made in India and shipped to the US. Freight, duty and tax are not included in preview estimates, and delivery times and rates have not been published.

Care

Wipe along the grain with mild detergent and a soft cloth, then rinse and dry. Avoid chlorine bleach and steel wool, and don't leave wet cast iron or steel pans sitting in the sink. 316 steel resists chlorides better than 304, but both need the same basic care.

Contact

We have not published a contact address yet. Save your design link or download a trade brief and keep it for when we do.